Hard maple. Color: RTM Custom Color #130 1:1 ratio used
Staining Process: I used a wiped on method of dipping a shop towel that was kind of bunched up to a round point, using consistent pressure and moving with the grain. I used a feathered edge while working on the long boards. I then immediately went back and did a second coat using the same method. I was working under almost ideal conditions of 70F and 50% humidity.
Topcoat: First coat was original Enduro Var I had purchased last year...
In the booth today spraying some RTM #47 on an oak built in.
RTM #47 = 5 parts Burnt Umber + 1 part Trans Red Oxide + 3 parts Tavern Brown